ADC Circuit Board & Ignitor Repair
ADC Commercial Laundry Circuit Board Repair
ADC commercial washers and dryers use electronic control boards and related electrical components to manage machine operation. A failing board may cause intermittent operation, failure to start, unexpected shutdowns, abnormal display behavior, or other control-related symptoms.
123 Laundry Solutions offers repair options for selected ADC circuit boards and related components. The products displayed on this page represent available ADC repair services and replacement options. Always confirm compatibility with your specific machine and board before ordering.
Repair availability depends on the ADC machine model, board type, part number, condition, and the type of failure. Before ordering a repair, we recommend confirming your machine model, serial number, and the identification number on the board.
Common ADC Dryer Control Board Symptoms
Control-board problems can appear in different ways depending on the machine and board configuration. The following are examples of symptoms reported with ADC commercial dryer control boards.
Frequently Asked Questions
Can you repair ADC dryer control boards?
123 Laundry Solutions offers repair services for selected ADC control boards and related electronic components. Availability depends on the board type, part number, condition, and the specific repair service available.
Why does my ADC Phase 5 dryer display 8888?
Some ADC Phase 5 dual dryers may display 8888 and stop operating after running for several minutes. Some affected boards may also produce continuous beeping. These symptoms may be associated with a control-board problem, but they do not by themselves establish a definitive diagnosis.
My dryer is on and already lit, but it keeps calling for spark. Why?
If the dryer keeps trying to ignite even though the burner is already lit, this is often related to how the control board is reading the flame or temperature signal rather than a problem with the igniter itself. On some ADC boards, this can happen alongside other symptoms like an error code or intermittent shutdowns. Because wiring, sensors, and gas-valve components can cause similar behavior, we recommend confirming those first before assuming the board is at fault.
Why does my ADC dryer start for a second and then stop?
A dryer that briefly engages and then stops may have a problem involving the control system, but other electrical and machine conditions can cause similar symptoms. If a known-good board restores normal operation, the original board may be the source of the problem, but proper diagnosis should still be performed.
What information do I need to send for an ADC board repair?
Whenever possible, provide the ADC machine model, serial number, board part number, and a description of the problem. Photos of the board and its identification labels can also help with component identification.
Can you tell if my ADC board is bad from the symptoms?
Symptoms can help identify a possible control-board problem, but they are not always enough to confirm a failed board. Electrical, wiring, safety, and other machine components may cause similar symptoms. Proper testing is recommended before determining that a board requires repair.
Should I replace the ADC board instead of repairing it?
That depends on the condition of the board, availability of a compatible replacement, repair availability, and overall equipment requirements. If the board is repairable, repairing the existing component may be an alternative to purchasing a replacement.
Need Help With an ADC Circuit Board?
Not sure which ADC board or repair service you need? Send us your machine information, board part number, and a description of the symptoms.
You can also browse the ADC repair options displayed on this page to find the board or service that matches your equipment.